Binaların Yıkılması Yönetmeliği’nde Patlayıcı ile Yıkım Değişikliği

⚖️ Mevzuat Uyarısı ⚖️ Regulatory Alert

📋 Bu Yazıda Öğrenecekleriniz

  • Değişikliğin hangi hükmünün bugün, hangisinin 2027’de yürürlüğe gireceği
  • Yeni “patlatmadan sorumlu mühendis” unvanı ve aranan yeterlilik şartları
  • Patlayıcı ile yapılan her yıkımın neden “yüksek yapı” rejimine tabi olduğu
  • 2,5H etki alanı, titreşim–hava şoku sınırları ve zorunlu ölçüm altyapısı
  • Bir yıllık geçiş süresinde tamamlanması gereken hazırlık kalemleri

📋 What You Will Learn

  • Which provisions take effect today and which only in August 2027
  • The new “engineer responsible for blasting” role and its qualification requirements
  • Why every explosive demolition now falls under the high-rise regime
  • The 2.5H zone of influence, vibration and air-overpressure limits, and mandatory instrumentation
  • What foreign and domestic contractors must complete during the one-year transition

Çevre, Şehircilik ve İklim Değişikliği Bakanlığı, Binaların Yıkılması Hakkında Yönetmelik‘te kapsamlı bir değişikliğe gitti. Değişiklik 12 Ağustos 2026 tarihli ve 33338 sayılı Resmî Gazete‘de yayımlandı. Patlayıcı ile yıkım (blasting demolition) yapan her müteahhit, müellif ve mühendis için bu, Yönetmelik’in 2021’deki ilk yayımından bu yana getirilen en ağır düzenlemedir.

Türkiye’s Ministry of Environment, Urbanisation and Climate Change has substantially amended the Regulation on the Demolition of Buildings. The amendment was published in the Official Gazette of 12 August 2026, No. 33338. For any contractor, design author or engineer carrying out demolition by explosives, this is the most demanding regime imposed since the Regulation was first published in 2021 — and it applies equally to foreign firms operating in Türkiye.

Yazının tamamını okumaya vaktiniz yoksa, kritik beş sayı aşağıdadır.

If you read nothing else, these five figures define the new regime.

12.08.2027 Patlayıcı hükümlerinin yürürlük tarihi Date the blasting provisions take effect
2,5 × H Zorunlu etki alanı yarıçapı Mandatory zone-of-influence radius
135 dB Aşılamaz hava şoku üst sınırı Air-overpressure ceiling that may not be exceeded
(B) Ateşleyici asgari yeterlik belge sınıfı Minimum blaster competency certificate class
1 – 4 Patlatmaya izin verilen rüzgâr kuvveti Wind force range permitting detonation

1. Önce Takvim: Bugün Neredeyse Hiçbir Şey Yürürlükte Değil

1. First, the Calendar: Almost Nothing Is in Force Today

Sektörde en sık yapılacak hata, “yönetmelik yayımlandı, uygulanıyor” varsayımıdır. Değişikliğin MADDE 14 hükmü yürürlüğü ikiye ayırıyor ve bu ayrım, önümüzdeki bir yılın tamamını belirliyor.

The most common mistake will be to assume that publication equals application. Article 14 of the amendment splits entry into force in two, and that split governs the entire coming year.

12 AĞUSTOS 2026 12 AUGUST 2026 RG 33338 — YAYIM GAZETTE 33338 — PUBLISHED Bugün yürürlükte olanlar In force today • 7. maddeye eklenen 8. fıkra • New paragraph 8 of Article 7 (6306 kapsamı kamu yıkımları) (public demolitions under Law 6306) • Yürürlük ve yürütme maddeleri • Entry-into-force and enforcement 1 YILLIK HAZIRLIK SÜRESİ ONE-YEAR PREPARATION WINDOW 12 AĞUSTOS 2027 12 AUGUST 2027 TAM YÜRÜRLÜK FULL EFFECT Bir yıl sonra yürürlüğe girecekler Taking effect one year later • Patlatmadan sorumlu mühendis şartı • Engineer responsible for blasting • Madde 13/A ve 13/B (yüksek yapı rejimi) • Articles 13/A and 13/B (high-rise regime) • EK-5 ve EK-6 · diğer tüm hükümler • Annexes 5 and 6 · all other provisions
Şekil 1 — Değişikliğin yürürlük takvimi. Kaynak: Binaların Yıkılması Hakkında Yönetmelikte Değişiklik Yapılmasına Dair Yönetmelik, MADDE 14 (RG 12.08.2026, S. 33338). Özgün DTEX diyagramı.
Figure 1 — Entry-into-force timeline. Source: Regulation Amending the Regulation on the Demolition of Buildings, Article 14 (Official Gazette 12.08.2026, No. 33338). Original DTEX diagram.
📘 Mevzuat Dayanağı

MADDE 14 — Bu Yönetmeliğin; (a) 5 inci maddesiyle 7 nci maddeye eklenen sekizinci fıkra ile 14 üncü ve 15 inci maddeleri yayımı tarihinde, (b) diğer hükümleri yayımı tarihinden bir yıl sonra yürürlüğe girer.

Bugün yürürlüğe giren fıkra, 6306 sayılı Kanun kapsamında kamu kurum ve kuruluşları eliyle yapılacak yıkımlarda müteahhit ve şantiye şefi aranmayacağını; buna karşılık yıkım planı hazırlanması gereken tüm yıkımlarda fenni mesuliyetin bu kurumlarca üstlenilmesinin zorunlu olduğunu düzenler.

📘 Legal Basis

Article 14 — (a) the eighth paragraph added to Article 7 by Article 5 of this amendment, together with Articles 14 and 15, enter into force on the date of publication; (b) the remaining provisions enter into force one year after publication.

The paragraph in force today provides that, in demolitions carried out by public institutions under Law No. 6306, no contractor or site manager is required; in return, those institutions must themselves assume technical supervision for every demolition requiring a demolition plan.

Değişiklikle eklenen GEÇİCİ MADDE 2 ise kamu kurum ve kuruluşlarınca ihale kararı alınmış, ihale tarihi belirlenmiş veya ihalesi yapılmış olmakla birlikte yıkım ruhsatı düzenlenmemiş yapıların ruhsat işlemlerinin eski hükümlere göre sonuçlandırılacağını hükme bağlar. Bir yıllık süre bir erteleme değil, kadro ve ekipman hazırlığı için verilmiş bir geçiş süresidir.

The newly added Provisional Article 2 provides that, where a public institution has already taken a tender decision, fixed a tender date or completed a tender but no demolition permit has yet been issued, the permit process is concluded under the previous provisions. The one-year window is not a postponement — it is a transition period granted for staffing and instrumentation.

2. Yeni Aktör: Patlatmadan Sorumlu Mühendis

2. A New Role: The Engineer Responsible for Blasting

Değişikliğin en belirleyici unsuru, Yönetmelik’in 4’üncü maddesine eklenen “patlatmadan sorumlu mühendis” tanımıdır. Bu unvan artık patlayıcı ile yapılan her yıkımın zorunlu bir kadrosudur.

The single most consequential change is the definition of the “engineer responsible for blasting” (patlatmadan sorumlu mühendis) inserted into Article 4. The role is now mandatory staffing on every demolition using explosives.

PATLAYICI İLE YIKIM DEMOLITION BY EXPLOSIVES yıkım ruhsatı + yıkım planı (EK-5) demolition permit + plan (Annex 5) Fenni Mesul Technical Supervisor ZORUNLU MANDATORY İnşaat mühendisi Civil engineer Patlayıcı ile yıkımda Required without istisnasız aranır exception for blasting İkiden fazla bodrumlu Also for buildings with binalarda da zorunlu 3+ basement floors Müellif Design Author TASARIM DESIGN Statik proje müellifliği Civil engineer meeting şartlarını haiz inşaat müh. structural-design criteria Taşıyıcı sistem analizi, Load-bearing analysis, devrilme senaryosu, collapse scenario, yıkım simülasyonu demolition simulation Patlatmadan Sorumlu Mühendis Engineer Responsible for Blasting YENİ NEW İnşaat / maden / çevre / Civil, mining, environmental, jeoloji / jeofizik lisansı geology or geophysics degree + Bakanlık yetkili kurum + Ministry-authorised body sertifikası VEYA alanında certificate OR a thesis tezli yüksek lisans master’s in the field Ateşleyici Blaster (B) SINIFI CLASS (B) Patlayıcı Madde Ateşleyici Compliant with the Blaster Yeterlilik Belgesi Competency Certificate Yönetmeliği’ne uygun Regulation Asgari (B) sınıfı belge Minimum class (B) RG 11.07.2002 / 24812 MÜŞTEREK SORUMLULUK JOINT RESPONSIBILITY Yıkım planını birlikte hazırlar; patlatma anında They prepare the demolition plan jointly and must ikisi birlikte şantiye sahasında bulunur. both be present on site during the blast.
Şekil 2 — Patlayıcı ile yıkımda zorunlu görev şeması ve yeterlilik şartları. Kaynak: Yönetmelik md. 4, 5, 6 ve 13/B (12.08.2026 değişik hâli). Özgün DTEX diyagramı.
Figure 2 — Mandatory roles and qualification requirements in explosive demolition. Source: Regulation Arts. 4, 5, 6 and 13/B as amended 12.08.2026. Original DTEX diagram.

EK-5, iki uzmanın görev sınırını da netleştiriyor. Müellif, yapının taşıyıcı sistemini inceleyerek kritik elemanları belirler, yıkılma yönünü ve devrilme senaryosunu oluşturur, patlatma sırasının mühendislik esaslarına uygun teorik planını hazırlar ve yıkım simülasyonunu raporlar. Patlatmadan sorumlu mühendis ise bu mühendislik esasına dayalı patlatma düzenini oluşturur; kullanılacak patlayıcı türü ve miktarını, deliklerin yerleşimini ve ateşleme zamanlamasını belirler; operasyonun güvenlik çemberi içinde icrasından sorumludur. Her iki uzman müşterek sorumluluk taşır ve 6’ncı maddeye eklenen fıkra uyarınca patlatma sırasında birlikte şantiye sahasında bulunur.

Annex 5 also draws the boundary between the two specialists. The design author examines the load-bearing system, identifies critical members, establishes the direction of collapse and the toppling scenario, prepares the theoretical initiation sequence on engineering principles, and reports the demolition simulation. The engineer responsible for blasting then converts that engineering basis into the blast design — explosive type and quantity, hole layout and initiation timing — and is accountable for executing the operation within the security cordon. Both carry joint responsibility, and under the paragraph added to Article 6 both must be physically present on site at the time of the blast.

3. Kapsamdaki Sessiz Devrim: Her Patlayıcılı Yıkım Artık “Yüksek Yapı” Rejiminde

3. The Quiet Revolution in Scope: Every Explosive Demolition Now Sits in the High-Rise Regime

Metnin en kolay gözden kaçan, en ağır sonuç doğuran hükmü 5’inci maddeye eklenen dördüncü fıkradır:

The most easily overlooked provision carries the heaviest consequence. It is the fourth paragraph added to Article 5:

⚠️ Kritik Hüküm

“Patlayıcı ile yapılacak tüm yıkımlar bu Yönetmeliğin yüksek yapıların patlayıcı ile yıkımına dair hükümlerine göre yürütülür.”

Yani binanın yüksekliği eşiğin altında kalsa dahi, yöntem patlayıcı ise EK-5 rejiminin tamamı devreye girer. Yıkım planı da EK-5’e göre hazırlanır.

⚠️ Critical Provision

“All demolitions carried out with explosives shall be conducted in accordance with the provisions of this Regulation on the demolition of high-rise buildings by explosives.”

In other words, even where the building falls below the high-rise threshold, choosing explosives triggers the entire Annex 5 regime — and the demolition plan must be prepared to Annex 5.

KonuDeğişiklikten önce12.08.2027 sonrası
KadroFenni mesul + ateşleyiciFenni mesul + müellif + patlatmadan sorumlu mühendis + (B) sınıfı ateşleyici
KapsamYüksek yapı hükümleri yalnız yüksek yapılaraPatlayıcı kullanılan her yıkım yüksek yapı rejiminde
Yıkım planıGenel esaslara göreEK-5‘e göre; patlayıcıya özgü ek belgelerle
Etki alanıAçık sayısal ölçüt yokDış cepheden 2,5 × bina yüksekliği
ÖlçümGenel çevre mevzuatıKalibre titreşim + basınç sensörü, yüksek hızlı kamera kaydı
Sahada bulunmaDüzenlenmemişMüellif ve patlatmadan sorumlu mühendis birlikte
Akustik raporMülga ÇDYYY atfıÇevresel Gürültü Kontrol Yönetmeliği (32029) atfı + belge eki
TopicBefore the amendmentFrom 12.08.2027
StaffingTechnical supervisor + blasterTechnical supervisor + design author + engineer responsible for blasting + class (B) blaster
ScopeHigh-rise provisions applied only to high-rise buildingsEvery demolition using explosives falls under the high-rise regime
Demolition planPrepared to the general provisionsPrepared to Annex 5, with blasting-specific annexes
Zone of influenceNo explicit numerical criterion2.5 × building height from the façades
InstrumentationGeneral environmental legislationCalibrated vibration + pressure sensors, high-speed camera recording
Presence on siteNot regulatedDesign author and blasting engineer together
Acoustic reportReferenced the repealed noise regulationReferences the Environmental Noise Control Regulation (No. 32029), with credentials annexed

Karşılaştırma, değişiklik metninin ilgili maddelerinden derlenmiştir; bağlayıcı metin Resmî Gazete nüshasıdır.

Compiled from the relevant articles of the amending text; the binding text is the Official Gazette version.

4. Etki Alanı: 2,5 × Bina Yüksekliği

4. The Zone of Influence: 2.5 × Building Height

EK-5, patlayıcı ile yıkımda yapının dış cephelerinden bina yüksekliğinin 2,5 katı mesafede bir etki alanı tanımlanmasını zorunlu kılıyor. Bu alandaki tüm yapılar, yapıya uzaklıkları da gösterilerek krokiye işlenir; hassas alıcılar ise ayrıntılı olarak tespit ve raporlanır.

Annex 5 requires a zone of influence to be defined at a distance of 2.5 times the building height, measured from the façades. Every structure within that zone must be plotted on a site sketch together with its distance to the building, and sensitive receptors must be surveyed and reported in detail.

YIKILACAK YAPI BUILDING TO BE DEMOLISHED R = 2,5 × H R = 2.5 × H HastaneHospital OkulSchool Tarihî yapı / müzeHeritage building / museum İbadethanePlace of worship Metro tüneliMetro tunnel Yeraltı otoparkıUnderground car park Doğalgaz ana dağıtımMain gas distribution centre Elektrik şaft merkeziElectrical shaft centre LEJANT LEGEND Toplu kullanım / kültür varlığı Public use / cultural asset Altyapı / yeraltı yapısı Infrastructure / underground H = bina yüksekliği H = building height Etki alanındaki yollar Roads inside the zone trafiğe kapatılır. are closed to traffic.
Şekil 3 — EK-5’e göre etki alanı ve hassas alıcı tespiti (temsilî plan krokisi, ölçekli değildir). Kaynak: Yönetmelik EK-5, md. 1.1.5. Özgün DTEX diyagramı.
Figure 3 — Zone of influence and sensitive-receptor survey under Annex 5 (illustrative plan sketch, not to scale). Source: Regulation Annex 5, cl. 1.1.5. Original DTEX diagram.

Bu alan içerisindeki hastaneler, okullar, ibadethaneler ve benzeri toplu kullanım alanları; tarihi yapılar, müzeler ve kültürel varlıklar; hassas ekipman barındıran sanayi tesisleri; metro tünelleri, yeraltı otoparkları ve benzeri yeraltı yapıları ile elektrik şaft merkezleri ve doğalgaz ana dağıtım merkezleri ayrıntılı biçimde tespit edilir. Patlatma öncesinde bu yapılarda oluşacak titreşim değerleri belirlenir; sınır değerlerin aşılmasına izin verilmez. Patlatma sırasında oluşan değerler ölçülür ve raporlanır. Etki alanındaki yollar trafiğe kapatılır.

Hospitals, schools, places of worship and comparable public-use areas; heritage buildings, museums and cultural assets; industrial facilities housing sensitive equipment; metro tunnels, underground car parks and similar subsurface structures; and electrical shaft and main gas distribution centres within this zone must all be surveyed in detail. Vibration levels expected at these structures are determined before the blast and the limit values may not be exceeded. Actual levels are measured and reported during the blast, and roads inside the zone are closed to traffic.

5. Titreşim, Hava Şoku ve Zorunlu Ölçüm Altyapısı

5. Vibration, Air Overpressure and Mandatory Instrumentation

EK-5 kapsamında hazırlanan akustik rapor, gürültü, titreşim ve taş savrulması kontrolünü birlikte ele alır. Rapor, Çevresel Gürültü Kontrol Yönetmeliği’nde belirtilen yetkinliğe sahip kişilerce hazırlanır ve hazırlayanın diploma, eğitim ve sertifika belgeleri raporun ekinde sunulur.

The acoustic report prepared under Annex 5 addresses noise, vibration and flyrock control together. It must be prepared by persons holding the competence specified in the Environmental Noise Control Regulation, and the author’s degree, training records and certificates must be annexed to the report.

Titreşim sensörü Vibration sensor KALİBRE ZORUNLU CALIBRATION REQUIRED Parçacık hızı (PPV) Peak particle velocity ölçümü ve raporlaması measurement and reporting Basınç sensörü Pressure sensor ÜST SINIR 135 dB CEILING 135 dB Hava şoku (Ps) Air overpressure (Ps) yayılımının belirlenmesi propagation assessment Yüksek hızlı kamera High-speed camera KAYIT ZORUNLU RECORDING REQUIRED Yıkımın görsel Visual documentation olarak belgelenmesi of the demolition Meteoroloji Meteorology RÜZGÂR KUVVETİ 1–4 WIND FORCE 1–4 Değerlendirme yapılmadan No blast without a patlatma yapılamaz meteorological assessment
Şekil 4 — Madde 13/B ve EK-5 uyarınca zorunlu ölçüm, kayıt ve meteorolojik değerlendirme altyapısı. Özgün DTEX infografiği.
Figure 4 — Mandatory measurement, recording and meteorological assessment infrastructure under Article 13/B and Annex 5. Original DTEX infographic.

EK-5, farklı bina türleri için azami parçacık hızı aralıklarını Tablo 3‘te, meteorolojik sınır değerleri Tablo 4‘te tanımlar. Hava şoku değerinin 135 desibelin üzerine çıkmasına ve parçacık hızının ilgili tablodaki üst sınır değerini aşmasına izin verilmez. Çevresel etkilerin önlenmesinde ayrıca TS 13633 — Yapıların tam ve kısmi yıkımı için uygulama kuralları standardına atıf yapılır. Yıkım öncesinde EK-5 esaslarına uygun test patlatması yapılabilir; yapıldığı takdirde EK-6’daki Form-8‘in doldurulması zorunludur.

Annex 5 sets out maximum particle-velocity ranges for different building types in Table 3 and meteorological limit values in Table 4. Air overpressure may not exceed 135 decibels, and particle velocity may not exceed the upper limit in the applicable table. For the prevention of environmental effects the Annex also refers to TS 13633 — Rules of practice for full and partial demolition of structures. A test blast may be performed beforehand in accordance with Annex 5; where one is performed, completing Form 8 of Annex 6 is mandatory.

💡 Mühendislik Notu

EK-5’te parçacık hızı ve hava şoku tahmini için iki bağıntı (Denk. 1.1 ve Denk. 1.2) verilmiştir. Her iki bağıntı da gecikme başına şarj miktarını ve mesafeyi temel değişken kabul eder. Pratik sonuç değişmez: sınırın altında kalmanın iki güçlü aracı, gecikme başına şarjın sınırlanması ve mesafenin artırılmasıdır.

💡 Engineering Note

Annex 5 provides two relationships (Eq. 1.1 and Eq. 1.2) for estimating particle velocity and air overpressure. Both treat charge weight per delay and distance as the governing variables. The practical conclusion is unchanged: limiting the charge per delay and increasing distance remain the two strongest levers for staying below the limits.

6. Bir Yıllık Geçiş Süresinde Yapılması Gerekenler

6. What to Complete During the One-Year Transition

Düzenleme, patlayıcı ile yıkımı “müteahhitlik işi” olmaktan çıkarıp belgelendirilmiş mühendislik disiplinine bağlıyor. 12 Ağustos 2027’ye kadarki süre, üç başlıkta hazırlık süresidir.

The amendment moves explosive demolition out of the category of general contracting and binds it to a certificated engineering discipline. The period to 12 August 2027 is preparation time across three fronts — and foreign firms bidding on Turkish projects face the same requirements, with the added task of having overseas qualifications recognised.

🗂️ Hazırlık Kontrol Listesi

  • Kadro — patlatmadan sorumlu mühendis. Beş lisans programından birine sahip mühendisin, Bakanlığın yetkilendirdiği kurumdan sertifika alması ya da alanında tezli yüksek lisans derecesini belgelendirmesi.
  • Kadro — ateşleyici. Mevcut ateşleyici kadrosunun (B) sınıfı yeterlik belgesi bakımından gözden geçirilmesi; eksiklerin tamamlanması.
  • Kadro — müellif. Statik proje müellifliği şartlarını haiz inşaat mühendisi ile çalışma düzeninin kurulması ve görev sınırlarının sözleşmeye yazılması.
  • Ekipman — ölçüm. Titreşim ve basınç sensörlerinin kalibrasyon belgelerinin güncellenmesi; kalibrasyon takviminin kurulması.
  • Ekipman — kayıt. Yüksek hızlı kamera kapasitesinin sağlanması ve kayıt/arşiv usulünün belirlenmesi.
  • Süreç — yıkım planı. Mevcut yıkım planı şablonlarının EK-5 içeriğine göre yeniden yazılması; etki alanı krokisi, akustik rapor ve atık yönetim planı eklerinin standartlaştırılması.
  • Süreç — formlar. EK-6 form setinin (Durum Tespit Formu ve test patlatması Form-8 dâhil) şantiye defteri düzenine işlenmesi.
  • Ticari — ihale. 12.08.2027 sonrasına sarkacak işlerde ilave kadro ve ölçüm maliyetinin bugünden tekliflere yansıtılması.

🗂️ Readiness Checklist

  • Staffing — blasting engineer. An engineer holding one of the five accepted degrees must obtain a certificate from a Ministry-authorised body or evidence a thesis master’s degree in the field.
  • Staffing — blaster. Review the existing blaster roster against the class (B) competency certificate and close any gaps.
  • Staffing — design author. Establish a working arrangement with a civil engineer meeting the structural-design criteria and set the division of duties in contract.
  • Equipment — measurement. Update calibration certificates for vibration and pressure sensors and put a calibration schedule in place.
  • Equipment — recording. Secure high-speed camera capability and define the recording and archiving procedure.
  • Process — demolition plan. Rewrite existing plan templates to Annex 5; standardise the zone-of-influence sketch, acoustic report and waste management plan annexes.
  • Process — forms. Incorporate the Annex 6 form set (including the condition survey form and test-blast Form 8) into site-book procedure.
  • Commercial — tendering. Price the additional staffing and instrumentation into bids now for any work extending beyond 12 August 2027.

Etki Alanı, PPV ve Hava Şoku Değerlendirmesini DTEX Araçlarıyla Yapın

Run Zone-of-Influence, PPV and Air-Overpressure Checks with DTEX Tools

Yeni rejimin sayısal gereklilikleri — titreşim, hava şoku ve savrulma güvenli mesafesi — DTEX mühendislik araçlarında mevzuat limit kontrolüyle birlikte hesaplanır.

The numerical requirements of the new regime — ground vibration, air overpressure and flyrock safety distance — are computed in the DTEX engineering tools together with regulatory limit checking.

Araç Merkezini Açın → Open the Tool Centre →

Sonuç

Conclusion

Değişikliğin özü üç cümlede toplanabilir: patlayıcı ile yıkım artık belgelendirilmiş bir mühendislik kadrosu gerektiriyor; yapı yüksekliğinden bağımsız olarak en ağır rejime tabi; ve tasarımın yanı sıra ölçümle ispat zorunlu. Bir yıllık geçiş süresi, bu üç gerekliliği karşılayan firmalar için rekabet avantajına dönüşecek bir hazırlık penceresidir.

The amendment comes down to three propositions: explosive demolition now requires a certificated engineering team; it falls under the strictest regime regardless of building height; and design must be accompanied by proof through measurement. For firms that meet all three, the one-year transition is a window that converts directly into competitive advantage.

İlgili yazı: Binaların Yıkılması Hakkında Yönetmelik Kapsamında Patlatmalı Yıkım: Yıkım Planı ve Akustik Rapor Gereklilikleri — 12 Ağustos 2026 öncesindeki çerçeveyi anlatır. Bu yazıdaki hükümler 12 Ağustos 2027 itibarıyla o çerçevenin yerini alacaktır.

Related article: Demolition by explosives under the Regulation on the Demolition of Buildings: demolition plan and acoustic report requirements (in Turkish) — describes the framework in force before 12 August 2026, which the provisions discussed here replace from 12 August 2027.

Ekibimiz: Y1 yetki belgeli iş ortağımız ve patlatmadan sorumlu mühendisimizle tek ekip olarak çalışıyoruz — Y1 müteahhit ve patlatmadan sorumlu mühendis.

Our team: We work as one team with our Y1-licensed partner and our engineer responsible for blasting — Y1 contractor and engineer responsible for blasting.

Sıkça Sorulan Sorular

Frequently Asked Questions

Değişiklik bugünden itibaren mi uygulanıyor?

Hayır. 12 Ağustos 2026’da yalnızca 5’inci maddeyle 7’nci maddeye eklenen sekizinci fıkra (6306 kapsamındaki kamu yıkımları) ile yürürlük ve yürütme maddeleri yürürlüğe girdi. Patlayıcı ile yıkıma ilişkin hükümlerin tamamı 12 Ağustos 2027’de yürürlüğe girecek.

Alçak bir binayı patlayıcı ile yıkarsam EK-5 rejimi uygulanır mı?

Evet. 5’inci maddeye eklenen dördüncü fıkra uyarınca patlayıcı ile yapılacak tüm yıkımlar, Yönetmelik’in yüksek yapıların patlayıcı ile yıkımına dair hükümlerine göre yürütülür. Yükseklik eşiği bu noktada belirleyici değildir.

Patlatmadan sorumlu mühendis ile ateşleyici aynı kişi olabilir mi?

Yönetmelik bu iki görevi ayrı ayrı sayar ve farklı yeterlilik ölçütlerine bağlar: patlatmadan sorumlu mühendis için beş lisans programından biri artı sertifika veya tezli yüksek lisans; ateşleyici için (B) sınıfı yeterlik belgesi. Görevlerin ayrı kişilerce üstlenilmesi esastır.

Hâlihazırda ihalesi yapılmış kamu işlerinde hangi hükümler geçerli?

Eklenen GEÇİCİ MADDE 2 uyarınca, kamu kurum ve kuruluşlarınca maddenin yürürlük tarihinden önce ihale kararı veya ihale tarihi alınmış ya da ihalesi yapılmış, ancak yıkım ruhsatı düzenlenmemiş yapıların ruhsat işlemleri, önceki hükümlere göre sonuçlandırılır.

Test patlatması zorunlu mu?

Zorunlu değil, ihtiyaridir. Madde 13/B, yıkım öncesinde EK-5 esaslarına uygun test patlatması yapılabileceğini belirtir. Ancak test patlatması yapıldığı takdirde EK-6’da yer alan Form-8’in doldurulması zorunludur.

Does the amendment apply from today?

No. On 12 August 2026 only the eighth paragraph added to Article 7 (public demolitions under Law 6306) and the entry-into-force and enforcement articles took effect. All provisions concerning demolition by explosives take effect on 12 August 2027.

Does the Annex 5 regime apply if I demolish a low-rise building with explosives?

Yes. Under the fourth paragraph added to Article 5, all demolitions carried out with explosives are conducted in accordance with the provisions on the demolition of high-rise buildings by explosives. The height threshold is not decisive at this point.

Can the blasting engineer and the blaster be the same person?

The Regulation lists the two roles separately and attaches different qualification criteria: for the engineer responsible for blasting, one of five degrees plus a certificate or a thesis master’s; for the blaster, a class (B) competency certificate. The roles are intended to be held by different individuals.

Which provisions govern public works already tendered?

Under the newly added Provisional Article 2, where a public institution took a tender decision, fixed a tender date or completed a tender before the article’s entry into force but no demolition permit has been issued, the permit process is concluded under the previous provisions.

Is a test blast mandatory?

No — it is optional. Article 13/B states that a test blast may be performed before demolition in accordance with Annex 5. However, where a test blast is performed, completing Form 8 of Annex 6 is mandatory.

Bağlayıcı metin, Resmî Gazete’de yayımlanan güncel nüshadır. Bu yazı bilgilendirme amaçlıdır.

The binding text is the current version published in the Official Gazette. This English text is an unofficial working translation with no legal force, provided for information.

◆ ◆ ◆

📚 Kaynaklar

  1. Binaların Yıkılması Hakkında Yönetmelikte Değişiklik Yapılmasına Dair Yönetmelik — Resmî Gazete, 12.08.2026, sayı 33338.
  2. Aynı Yönetmeliğin ekleri — EK-2, EK-3, EK-4 (değişik), EK-5 ve EK-6.
  3. Binaların Yıkılması Hakkında Yönetmelik — Resmî Gazete, 13.10.2021, sayı 31627.
  4. Patlayıcı Madde Ateşleyici Yeterlilik Belgesinin Verilmesi Esas ve Usullerinin Belirlenmesi Hakkında Yönetmelik — Resmî Gazete, 11.07.2002, sayı 24812.
  5. Çevresel Gürültü Kontrol Yönetmeliği — Resmî Gazete, 30.11.2022, sayı 32029.
  6. TS 13633 — Yapıların tam ve kısmi yıkımı için uygulama kuralları.

📚 Sources

  1. Regulation Amending the Regulation on the Demolition of Buildings — Official Gazette, 12.08.2026, No. 33338.
  2. Annexes to the same Regulation — Annexes 2, 3 and 4 (as amended), and Annexes 5 and 6.
  3. Regulation on the Demolition of Buildings — Official Gazette, 13.10.2021, No. 31627.
  4. Regulation on the Principles and Procedures for Issuing Explosives Blaster Competency Certificates — Official Gazette, 11.07.2002, No. 24812.
  5. Environmental Noise Control Regulation — Official Gazette, 30.11.2022, No. 32029.
  6. TS 13633 — Rules of practice for full and partial demolition of structures.